Sewing a Reversible Placemat

Placemats are so versatile and making them reversible just doubles their use!!  Not only do they serve the great purpose of collecting those crumbs and spills when eating but they can be used as custom decor on your table for a beautiful centerpiece or to add some sparkle if hosting a buffet to use under the various food items that are being served.

In addition, they are extremely easy to make and you can customize or embellish them to match your decor.  You really don’t even need to purchase a pattern.  You can use a placemat that you already have as your pattern or cut out a template from lightweight, unfusible pellon as a pattern.  You can even just use a good ruler to design the style of placemat you want to make.  Probably a good rule of thumb would be to make your rectangular style finished placemat size to be 18″ wide x 13″ long.

So let’s begin.  First select what two fabrics that you want for your placemat.  Keep in mind how you want to clean them.  Are they going to be used as an everyday item, which means you want fabric that can be washed and dried often, or just for special occasions.  Cotton fabrics are a super choice, but check out those home dec fabrics too and some non-traditional fabrics like corduroy or faux suede.  Maybe you want a holiday theme for one side and a solid look for the other!!  Anyways, give some good thought to this process.

Cut out your fabric to be 1/2″ larger on all sides, so for a finished 18″ x 13″ size,  you would cut your pattern to be 19″ wide x 14″ long.  I always use a thin batting to be placed in the middle of my fabrics, such as bleached Warm ‘n Natural or Hobbs Heirloom. Depending upon your fabric, you can add your batting to the wrong side of each piece or maybe you only need batting on one side.  I personally prefer to use non-fusible batting for this project because I feel it will hold up better especially if laundering a lot.

SONY DSC
Preparing to cut fabrics

If using 100% cotton, you can get a perfect straight of grain line to use for cutting by ripping the fabric.  Make a small clip about 1/2″ in from the selvage edge and then just grab the fabric with one hand and that small clipped piece with the other hand and pull away.  The fabric will tear along the grains straight edge for you.  Now you can use your ruler and cutting mat to evenly measure for the placemat cut size.

SONY DSC
Another pic showing how to cut using a ruler

When cutting with a rotary cutter, I tend to line my ruler up with the fabric rather than with the lines on the cutting mat.  I use them as guidelines but I feel you get a straighter cut by lining up the ruler lines with the edges of your fabric.

Cut your batting the same size as your cut fabric pieces and baste the batting to the wrong side of your fabric using a 1/4″ seam allowance.  I like to do this process when I know I will not be making any quilt stitching lines to help hold the batting to the fabric.

Sewn batting to wrong sides of fabric
Sewn batting to wrong sides of fabric
SONY DSC
Pinned with right sides together leaving opening for turning

Another little trick I do – is to place the same colored pin heads at my starting point and ending point as reminders to leave that opening for turning or I use flower head pins for those areas and other glass head pins for the rest of the project.

Now, line up your two fabric pieces, right sides together and leave about a 4″ – 5″ opening for turning.  Stitch entire piece in a 1/2″ seam allowance.  You can trim close to the stitching or serge/overlock stitch your edge to have a nice clean seam and again to help eliminate some bulkiness.  Remember not to trim the opening – this just makes it easier to tuck that seam area inside for the top stitching step.  Once turned and you have inserted the raw edges into the opening – press good using a pressing cloth too.

Sewn and trimmed, ready to turn
Sewn and trimmed, ready to turn
SONY DSC
Turned, pressed and ready to do top-stitching

Once turned, fold your opening seams to the inside and press the entire placemat smooth.  Now top-stitch around the entire placemat close to the edge, approximately 1/8″ from finished edge.  Use a good pressure foot that maybe has a marking that you can follow to help keep your stitching line even or use a 1/4″ pressure foot as your stitching guide.  If you decide to use a 1/4″ pressure foot or marking, you might need to do a blind stitch only along the turn opening so it doesn’t separate at that spot.

I always like to make another top-stitching line around the placemat edge about 1/4″ from the first top-stitching line.  Mainly for decorative purposes –  gives a sort of picture frame effect.  Sometimes it is cool looking to even add another top-stitching line 1/4″ from the second stitching line.

Completed top-stitching
Completed top-stitching
Another pic showing three rows of top-stitching
Another pic showing three rows of top-stitching
Using this placemat on table under floral arrangement

Press again and your placemat is ready for use!!

Using this placemat on table under floral arrangement

This  project is perfect for a beginner sewer or a young child who is familiar with a sewing machine and has adult supervision especially using an iron and rotary cutter.  Wonderful gift giving project too.

HAPPY CREATING!!

Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.